NTT docomo FOMA N706i, Инструкция по эксплуатации

Страница: 510 / 519

57
ATS104= n
[&F]
Sets the calling sub
address character. n = 0 : #
n = 1 : % (initial value)
n = 2 : &
ATS104=0
OK
ATS104?
000
OK
ATS104=?
ERROR
ATV n
[&F] [&W]
Specifies whether the result
code is returned in
numerals or alphabets. n = 0 : Returns the result code in numeral
value.
n = 1 : Returns the result code in
characters (initial value).
ATV1
OK
ATX
n
[&F] [&W]
Specifies whether the
speed indication is present
in the CONNECT display
when connecting the line.
Also detects a busy tone or
a dial tone.
n
= 0 : Without dial tone detection; without
busy tone detection; without speed
display.
n
= 1 : Without dial tone detection; without
busy tone detection; with speed
display.
n
= 2 : With dial tone detection; without
busy tone detection; with speed
display.
n
= 3 : Without dial tone detection; with
busy tone detection; with speed
display.
n
= 4 : With dial tone detection; with busy
tone detection; with speed display.
(initial value)
ATX1
OK
ATZ Resets the current setting
to the contents of the non-
volatile memory.
If this command is input
during communication, the
line will be disconnected.
−
(Online command
mode)
ATZ
NO CARRIER
(Offline command
mode)
ATZ
OK
+++ In response to the escape
sequence, the online data
mode changes to the online
command mode while
maintaining the line
connection. − (Online data mode)
+++ (No display)
OK
AT command Outline Parameter/description Command execution example