NTT docomo FOMA N706i, Инструкция по эксплуатации

Страница: 404 / 519

402
Appendix/Exte
rnal De
vic
es/T
roub
leshooti
ng
“Memory No. XXXX cannot rewrite”
●
This is displayed when you are not in Secret mode or
Secret data only mode, but you try to register the same
phone number as a secret data memory number in the
phonebook.
→ P.113
“Memory shortage Quit”
●
The process is interrupted due to memory shortage.
When you are composing an i-mode mail, the number
of tasks running and the combination of characters may
make it impossible to input as many as 5,000 double-
byte characters.
“Memory shortage Return to i-mode menu”
●
The process is interrupted due to memory shortage.
Press
d
to return to the i-mode menu.
“Memory shortage”
●
Operation is interrupted due to memory shortage. If
this message often appears, reboot handset.
“Message too long to add header & signature”
●
This is displayed when you are forwarding i-mode mail,
but it was not possible to automatically paste the
header/signature because they would cause the
character count to exceed the limit of 5,000 double-byte
characters.
“Message too long to add header”
●
This is displayed when the character count of the text
and header in total exceeds 5,000 double-byte
characters and the header cannot be added.
“Message too long to add signature”
●
The signature cannot be pasted because the total of
main text and signature would exceed 5,000 double-
byte characters.
“No Channel information”
●
You cannot compose suggested message because
there is no channel information.
“No contract for this service”
●
The i-mode service is not available because you have
not subscribed to the service. A separate subscription
is required to use the service.
●
If you had started using the FOMA terminal before you
subscribed to i-mode, turn the FOMA terminal off and
then turn it back on.
“No data”
●
This is displayed if there is no phonebook entry that
matches the search conditions when you perform
Phonebook search.
“No microSD inserted”
●
The microSD card is not inserted correctly, or may be
broken. Check that the microSD card is correctly
inserted into the FOMA terminal.
→
P.268
“No more functions can be started”
●
Close another function before continuing the operation.
“No requested data Delete this desktop icon?”
●
This is displayed when you select the desktop icon for
data that has been deleted and attempt to start it.
“No requested software”
●
It is displayed when an i-
α
ppli is started from mail,
Send Ir data function, Barcode reader, IC card or data
broadcast, and the relevant software is absent.
“No response (408)”
●
There was no response from the site, and
communication was cut off. Retry connection.
“No Switch”
●
This is displayed when you cannot switch to a
videophone call during a voice call because the other
party is establishing a packet communication (including
i-mode). Check the other party’s status and retry.
→
P.53
“No User Certificate. Continue?”
●
User Certificate has not been downloaded. It may be
possible to display the site by selecting “YES”, but for
some sites it may be impossible to continue. → P.164
“No “i-
α
ppli To” setting”
●
This is displayed when you attempted to start software
from a site, mail, Send Ir data, barcode reader, IC card,
ToruCa or data broadcast, but the software could not
start because the specified software has no association
permission.
→
P.220
“Not correspond contents”
●
The information acquired by the bar code reader
includes content not supported by this FOMA terminal,
so it cannot be recognized.
“Omakase lock is engaged”
●
Omakase lock is set. While Omakase Lock is set, all
key operations are locked except receiving a voice call/
videophone call and turning the power on/off.
→
P.112
“Other function active Cannot start”
“Other function active Cannot operate”
●
This is displayed when you attempt an unavailable
operation when another function is running.
“Out of service area”
●
This is displayed when you attempt to use an i-mode
service outside the service area, or where the radio
waves do not reach. Move to a place where “
” is
displayed, then use the i-mode service. → P.46
“Page is not found (404)”
●
The site is not found. It may not exist.
“Password is not correct (401)”
●
This is displayed when the authentication did not go
through on the “Authentication” or “Re-authentication”
screen. Select “YES” to retry authentication.
“Please wait (packet)”
●
The packet communication device may be
malfunctioning. Otherwise, the packet communication
network may be congested. Retry later.