NTT docomo FOMA N706i, Инструкция по эксплуатации

Страница: 400 / 519

398
Appendix/Exte
rnal De
vic
es/T
roub
leshooti
ng
I was disconnected while sending a message,
then received an SMS
A message appears when I retry
●
SMS interrupts communication and notifies you that a
large amount of data is being transferred within a given
time. Follow the contents of SMS and the displayed
message.
Images taken with the rear camera are flickered
●
When you take pictures indoors, flickering may appear
due to the effect of fluorescent lighting, etc. Changing
the “Flicker” setting may suppress flickering.
→
P.135
Still images or movies shot with the rear camera
look too bright
●
You may shoot them outside or in a bright place with
“Flicker” set to “Mode 1(50Hz)” or “Mode 2(60Hz)”.
Restore the “Flicker” setting to “Auto”.
→
P.135
Still images or movies look blurred
●
Move the lens selector switch of the rear lens to the ●
position (standard lens) for normal shooting or to the
position (macro lens) to switch to the close-up mode for
close-up shooting.
→ P.128
●
Set a mode suited to the scene being shot. → P.133
When I attempt to display the image, “ ”
appears. Or when I attempt to play for
demonstration or see a preview, “ ” appears
●
“ ” may appear when the image data is corrupted.
The terminal operates slowly when any keypads
are pressed
●
It may occur if a large amount of data is stored on the
FOMA terminal or if you exchange large data by using
the microSD reader/writer function.
Chance capture shooting shortens the shooting
time
●
Chance capture shooting saves control data together
with movie data, which may shorten the shooting time.
microSD card cannot be read during playback SD-
Audio data or “Replay error Quitting” appears
●
Move the audio data to PC by “SD-Jukebox”, then
format the microSD card on the “SD-Jukebox”. After
that, move back the audio data to the microSD card.
Asterisks are displayed twice for one button
press, when entering network security code or
i-mode password, etc.
●
Is the input mode set to double-byte mode (“ ”)?
Switch to single-byte mode (“ ”).
→
P.335
■
For overseas use
“ ” or “select net” does not disappear from
the screen, and international roaming service
cannot be used
●
Are you out of international roaming service area or is
the reception poor?
●
See the international service guide such as “Mobile
Phone User’s Guide [International Services]” to check if
the area or operator is available.
●
Turn off the FOMA terminal then turn it back on the first
time you use the service after you move from Japan to
overseas.
●
Launch “NW search mode” to search for a compatible
operator.
→ P.366
A voice call or videophone call cannot be
received
●
Is “Bar incoming when roam” set to “Activate”? → P.368
●
Is “V-phone while packet” set to something other than
“V-phone priority”? → P.72
●
The videophone is not available during GSM/GPRS
network.
The other party’s caller ID is not notified
The notified caller ID is not the other party’s
The FOMA terminal does not perform operations
using phonebook data or Caller ID Notification
●
If the used network or operator does not notify the
caller ID, the caller ID does not appear on the FOMA
terminal screen even when the caller ID is notified.
Depending on the used network or operator, the
notified caller ID may be different from the other party’s.