NTT docomo FOMA N706i, Инструкция по эксплуатации

Страница: 403 / 519

401 Continued on next page
Appendix/Exte
rnal De
vic
es/T
roub
leshooti
ng
“Data transmission is frequent Press CLR and
confirm data transmission”
●
This is displayed when the number of communications
from an i-
α
ppli standby screen becomes very large
within a certain period. Press
t
to select whether or
not to permit communications from the i-
α
ppli standby
display, or to close the i-
α
ppli standby display.
→
P.221
“Dial/Receive calls activating Original lock”
●
This is displayed when you have attempted a prohibited
operation while the original lock is applied to “Dial/
sending mail” and to “Incoming/Mail disp.”.
→ P.119
“Download failed”
●
This is displayed when a download of a melody, Chara-
den or download dictionary suffered a communication
error or improper data.
(During Infrared Data Exchange/iC Exchange)
“No response Retry?”
●
The receiving terminal cannot be found/detected. If Ir
communication is used, make sure the Ir ports are
facing each other. If iC exchange is used, check the
FeliCa marks and place them together again. You can
select “YES”, then press
d
to try again.
→
PP.282, 283
“Editing now Cannot delete”
●
This is displayed if you attempt to delete a mail
message saved in the Save box while it is being edited.
“Enter correct Network Security Code”
●
This is displayed when an incorrect network security
code was input for a function which requires network
security code entry. Enter the correct network security
code. → P.110
“Error in image Does not work correctly”
●
This is displayed when a Flash movie cannot be played
due to an error found in the data.
“Error Register forwarding number”
●
This message appears when you have subscribed to
the Call Forwarding service and attempt to forward an
incoming call by selecting “Call Forwarding” from the
function menu without setting the forwarding number.
→ P.344
“External IC card not found”
●
This is displayed when the IC card authentication
function was used for user authentication, but
authentication timed out and failed.
→ P.121
“Failed to Copy all”
●
Copying could not be complete, for some reason.
Replace with a different microSD card and try to copy
again.
“Failed to Copy this”
●
Copying could not be completed, for some reason.
Replace with a different microSD card and try to copy
again.
“For security, the i-
α
ppli standby screen was
canceled”
“Closed due to security error”
●
This is displayed when an i-
α
ppli or i-
α
ppli standby
screen (including i-
α
ppli DX) was closed because you
attempted to perform an unauthorized operation.
→
PP.211, 222
“Format microSD for your phone”
●
There is an error such as a microSD card that has not
been initialized. Reformat the microSD card. → P.275
“Input error (205)”
●
This is displayed after you input and send data from a
site of Internet homepage. Press
d
to cancel the input
text or settings (The set or input content has been sent,
so this operation does not cancel the transmission).
“Insert the FOMA card (UIM)”
●
This is displayed when the UIM is not inserted correctly,
or could be broken. Check that the FOMA card is
inserted correctly.
→ P.40
“Interrupted because maximum number of frames
exceeded”
●
The webpage cannot be displayed because the frame
count exceeds the maximum that can be displayed on
Full Browser.
“Invalid address”
●
The address contains a “,” and is invalid. Delete “,”.
●
Mail cannot be replied to because the address of the
received mail exceeds 50 single-byte characters.
●
SMS cannot be sent because the address includes
characters other than numerals, “#” and “
*
”. Delete
characters and spaces other than numerals, “#” and
“
*
”.
“Invalid URL”
●
This is displayed when you entered a URL using “Enter
URL” or “Home URL”, but it began with something other
than “http://” or “https://”, or you selected OK without
any input. Enter the URL again.
→ PP.154, 162, 244
“Is the ToruCa automatic reading function in a
mobile phone used through the reader/writer?”
●
This is displayed if you swiped the FeliCa mark over a
reader with “Auto reading setting” set to “OFF”. Select
“YES” to use the automatic reading function.
→
P.231
“Limited Unable to view”
●
Cannot view limited broadcast.
“Maximum size exceeded. Cannot receive (452)”
●
This is displayed when data being received cannot be
received because it exceeds the maximum size.
“Memory full Cannot move”
●
This is displayed when you try to move data out of a
secret folder but the destination folder is full. Delete
data from the destination folder, then move the data
again.
→ PP.114, 116