NTT docomo Arrows Me F-11D, Инструкция по эксплуатации

Страница: 133 / 157

Appendix/Index
131
● Calls are not connected (Even when moving, 圏外
(out of service area) does not disappear or although
radio waves are enough, making/receiving calls is
unavailable).
• Reattach the docomo mini UIM card. → P23
• Reattach the battery pack. → P25
• Turn the terminal OFF and ON. →
P29
• Due to the nature of radio waves, making/receiving
calls may be unavailable even when 4 signal status
icons appear on the display. Move to call again.
• Have you changed network type? → P124
• Due to the crossing of radio waves, at the crowded
public places, calls/mails are crossed and the
connection status may not be good. In this case,
"Please wait for a while" appears and the caller
hears a busy tone. Move to other place or call again
at other time.
● The ringtone does not sound.
• Check the ringtone volume. → P65
• Have you activated any of the following functions?
- Public mode (Drive mode) → P51
- Airplane mode → P61
- Manner mode → P64
• Have you set any of the following settings to 0 sec.?
- Ring time of Voice mail service
→
P51
- Ring time of Call forwarding service → P51
● Calls cannot be made.
• Is the docomo mini UIM card installed in the right
direction? → P23
• Do you enter a phone number from City code?
• Do you set Airplane mode?
→
P61
■ Mail
● The notification icon indicating new mail does not
appear.
• Have you changed any of the following settings?
- Notification in Settings for Messaging
→
P84
- Email notifications in Settings for Email
→
P87
■
1Seg/Camera
● Cannot watch 1Seg.
• Are you out of ground-based digital broadcasting
service area or in an area with poor signal strength?
• Are you set channels? → P105
●
Photos and videos taken with the camera are
blurred.
• Check if clouds or dirt attach to the lens of camera.
• Use [Auto] of Scene mode.
→ P108
• You can also focus using the following functions. →
P108, 109
- Focus mode
- Touch focus
• When shooting an object nearby, switch Focus
mode to [Macro].
→
P108, 109
■
Osaifu-Keitai
● Osaifu-Keitai function is unavailable.
• When removing the battery pack, Osaifu-Keitai
functions are unavailable regardless of the Osaifu-
Keitai lock settings.
• Is Osaifu-Keitai lock activated? → P100
• Do you place mark of the terminal over IC card
reader?
→
P100