NST HK-HDVR8-3, Руководство пользователя

Страница: 24 / 168

Digital Video Recorder User Manual
23
Figure 2. 4 Configure Signal Input Type
l
Each two video channels are grouped in sequence, e.g., CH01 and CH02, CH03 and CH04…, and the two
channels in the same group must be connected with the same type of video source, i.e., the analog or
HD-TVI or AHD video input.
l
In the live view interface, when there is no video signal of the analog channel, the corresponding
connectable video signal type message can be displayed on the screen.
2.3.2 Using the Wizard for Basic Configuration
By default, the Setup Wizard starts once the device has loaded.
Operating the Setup Wizard:
1. The Start Wizard can walk you through some important settings of the device. If you don’t want to use the
Start Wizard at that moment, click Exit. You can also choose to use the Start Wizard next time by leaving
the “Start wizard when device starts?” checkbox checked.
2. Click Next to enter the Password Configuration interface. Enter the admin password. If you want to change
the password, check the checkbox of New Admin Password, enter the new password and confirm it.
For the admin, you have 7 times to enter the password.
3. After the password configuration, click Next button to enter the Date and Time Settings window.
Figure 2. 5 Date and Time Settings
4. After the time settings, click Next button to enter the General Network Setup Wizard window, as shown in
Figure 2.11.