![background image](http://html1.mh-extra.com/html/nsi/midi-616/midi-616_operation-manual_1714439007.webp)
2
Pushbutton Functions
BLACKOUT
Pressing the BLACKOUT button instructs all lights to fade out instantly, or at a predetermined fade rate.
A short “tap” of the button will allow a gradual fade-out, while a “press and hold” action will cause an
instant blackout.
When a Chase Is active and the CHASE LED is lit or active, the first “tap” of the BLACKOUT button
will only cancel the chase. A second tap of the button will initiate a complete blackout. The button
should only be held down for the second tap, to initiate an instant blackout.
TECHNICAL NOTE
MIDI Information
When the BLACKOUT button is tapped, the current Fade Rate control setting is sent out the MIDI port
(on the back of the controller), followed by a “note-off” command (see MIDI data) for all 16 channels.
A “push and hold” action causes an “all-notes-off” command to follow the above data.
GO
When the GO button is tapped, all lights will fade to the current channel levels represented by the
current channel level slide control settings. A “push and hold” action will cause the lights to instantly
change to the current slide control settings. Once the lights have started to fade, and the “CROSSFADE
ACTIVE” LED is lit, the channel level slide controls can be readjusted without affecting the fade in
progress.
Lighting levels already in effect when the GO button is tapped twice in a row are stored, and can be
recalled by pressing the BACK button.
BACK
The BACK button is used to recall any scene lighting levels that were stored in memory when the GO
button was pressed the second time. When recalled, these light levels will be restored instantly or at the
preset Fade Rate.
Содержание MIDI 616
