NSI MIDI 616, Руководство по эксплуатации

Страница: 31 / 42

26
Preheat
Stage lighting preheat (minimum intensity) level can be set by executing the procedure described on the
previous page (Console and MIDI Configuration Mode Switches, Channel Number 5). The preheat level
is adjustable from 0% to 10% intensity. The preheat level will only affect stage lights, and will not be
affected by the MASTER LEVEL control.
Chase Dump
Programmed Chase sequences can be “dumped” to your sequencer for relocating at the beginning of a
special song. Follow these steps:
1. Roll back your sequencer. Use separate sequence or overdub.
2.
Adjust all channel level slide controls off (minimum).
3. Remove the MIDI input to console.
4. Activate the sequencer's Record Mode.
5. Hold both the Go and BACK buttons down and tap FLASH 1, 2, or 3 for dumping the
appropriate Chase number.
6. Channel level LEDs will light briefly while the dump Is taking place. The dump is completed
when the channel level LEDs go out.
The Chase sequence that was dumped will automatically reload whenever you play the sequence erasing
the old Chase program.