National Rejectors, Inc. GmbH, Germany
Page 7
Manual G-26.4000: Technical Information 5/93
7. Function S-99 = Standard setting
Function S-99 allows you to store the present setting of the changer and to execute the standard setting as
mentioned below.
Action
Key
Display
* Service function
E
S-01
* Select standard
F until S-99
S-99
setting
appears
* Execute standard
E
S-99
setting
H
+
S-99
HH
P
S-99
HHH
o The standard setting is executed and
after approximately 1.5 seconds appears
AA
When executing the service function S-99 again the stored changer setting is reestablished and the display
shuts down.
Standard setting:
1. Values from 00.10 up to 01.00 (in decimal steps) are assigned to prices 1 to 10.
2. No acceptance and change limitation (function 03)
3. Token 1 = 00.50, token 2 = 01.00, token 3 = 01.50 (function 03)
4. Single vend; Reset line 8 (function 04)
5. No single coin inhibit (function 15)
6. No printout of vend/sales data per price line (function 16)
7. Coins are inhibited within channels 4, 5, 6, 7, 8
when 'tube empty'
(function 17)
8. No communication with peripheral units (functions 18, 19, 20, 21)
9. 'Tube empty'- condition is set to 0 (function 22)
