NR Electric RCS-9698G, Инструкция по эксплуатации

Страница: 23 / 81

Chapter 3 Hardware Structure and Operation Theory
NR ELECTRIC CO., LTD. 13
Pin Signal Description
1 GND The ground connection.
2 RESV Not connected.
3 PWR + Positive pole of DC power supply.
4 RESV Not connected.
5 PWR - Negative pole of DC power supply.
6 RESV Not connected.
7 RESV Not connected.
8
9
BO_GEN.ALARM
General abnormality warning output, it is used for general
abnormality warning binary output that is synthesized by
this equipment, and it is OPEN in normal state, when
general abnormality warning condition is met, it is
CLOSED .
10
11
BO_GEN.FAULT
General failure alarm output, it is used for general failure
alarm binary output that is synthesized by this equipment,
and it is OPEN in normal state.
when general failure alarm condition is met, it is CLOSED .
12
13
BO_ FAIL
Failure signal output contact. When the equipment
operates normally, BO_FAIL is OPEN .
When the equipment is power-off or its HEALTHY LED is
lit off, BO_FAIL is CLOSED .
14
15
BO_ MASTER
Host/standby status output contact.
When the equipment operates as HOST MACHINE ,
BO_MASTER is OPEN .
When the equipment operates as HOT STANDBY
MACHINE , BO_MASTER is CLOSED .
16 BI_REMOTE
Remote/Local status input contact.
When input signal is received, it means that the equipment
is in “ Remote ” status. The control commands from the
master station will not be blocked by this contact.
If no input signal is received, it means that the equipment is
in “ Local ”status. The control commands from the master
station will be blocked by this contact.
17 BI_RESV1 Not connected.
18 BI_RESV2 Not connected.
19 BI_RESV3 Not connected.
20 OPTO- Common negative connection of the all the binary inputs.
3.3.2 CPU Board
CPU board is a core module of RCS-9698G/H .
CPU board must be configured in RCS-9698G/H .
CPU board can be equipped in slot 2, 3, 4 or 5.