NR Electric RCS-9698G, Инструкция по эксплуатации

Страница: 68 / 81

Chapter 5 Installation
NR ELECTRIC CO., LTD. 58
WARNING: The modules of this equipment may only be inserted in the designated slots.
Components can be damaged or destroyed by inserting boards in the wrong slots.
WARNING: Only insert or withdraw the other boards while the power supply is switched
off.
The basic precautions to guard against electrostatic discharge are as follows:

Should boards have to be removed from RCS-9698G/H installed in a grounded cubicle in an
HV switchgear installation, discharge yourself by touching station ground (the cubicle)
beforehand.

Only hold electronic boards at the edges, taking care not to touch the comp onents.

Only works on boards that have been removed from the cubicle on a workbench designed for
electronic equipment and wear a grounded wristband. Do not wear a grounded wristband,
however, while inserting or withdrawing units.

Always store and ship the electronic boards in their original packing. Place electronic parts in
electrostatic screened packing materials.
5.3 Checking the Shipment
Check that the consignment is complete immediately upon receipt. Notify the nearest NR
Company or agent, should departure s from the delivery note, the shipping papers or the order be
found.
Visually inspect all the material when unpacking it. When there is evidence of transport damage,
lodge a claim immediately in writing with the last carrier and notify the nearest NR Company or
agent.
If the equipment is not going to be installed immediately, store all the parts in their original packing
in a clean dry place at a moderate temperature. The ambient temperature and humidity required
for storage please refer to Chapter 2 .
5.4 Material and Tools Required
The necessary mounting kits will be provided, including screws, pincers and assembly
instructions.
A suitable drill and spanners are required to secure the cubicles to the floor using the plugs
provided (if RCS-9698G/H is mounted in cubicles).