NR Electric RCS-9698G, Инструкция по эксплуатации

Страница: 5 / 81

RCS-9698G/H Remote Terminal Unit
NR ELECTRIC CO., LTD. iii
CAUTION!

Earth
The earthing terminal of the equipment must be securely earthed

Operating environment
The equipment must only be used within the range of ambient environment detailed in the
specification and in an environment free of abnormal vibration.

Ratings
Before applying AC voltage and current or the DC power supply to the equipment, check that they
conform to the equipment ratings.

Printed circuit board
Do not attach and remove printed circuit boards when DC power to the equipment is on, as this
may cause the equipment to malfunction.

External circuit
When connecting the output contacts of the equipment to an externa l circuit, carefully check the
supply voltage used in order to prevent the connected circuit from overheating.

Connection cable
Carefully handle the connection cable without applying excessive force.
Copyright
Version : R1.02
P/N: EN_TXZZ0141.0086.000 3
Copyright © NR 20 11. All rights reserved
We reserve all rights to this document and to the information
contained herein. Improper use in particular reproduction and
dissemination to third parties is strictly forbidden except where
expressly authorized.
The information in this manual is carefully checked periodically,
and necessary corrections will be included in future editions. If
nevertheless any errors are detected, suggestions for correction or
improvement are greatly appreciated.
We reserve the rights to make technical improvements without
notice.
NR ELECTRIC CO., LTD.
69 Suyuan Avenue. Jiangning, Nanjing 211102
，
China
Tel: 86-25-87178185, Fax: 86-25-87178208
Website: www.nari-relays.com
Email: nr_techsupport@nari-relays.com