TC-10 User Manual
________________________________________________________________________________________________________________
___________________________________________________________________________
version 3.9
page 7
(
6
)
TEMPERATURE °C
B
display
Digital display to indicate the temperature determined by SENSOR B (
16
).
(
7
)
ALARM
LED
LED to indicate that temperature SENSOR B (
16
) is not connected, broken or
short-circuited. The POWER OUTPUT (
18
/
19
) shuts down if this LED is on and
the MODE switch (
14
) is set to SENSOR B.
(8)
LIMITER
potentiometer
Potentiometer to set the voltage range of the POWER OUTPUT (
18
/
19
),
100% = 12 Volt.
(
9
)
HEAT
LED
LED that indicates the status of the POWER OUTPUT (
18
/
19
) (LED on = heating).
(10) COMMAND INPUT 10mV/°C
connector
BNC connector to set the working temperature of the controller system by an
external voltage signal. This input is scaled with the factor 10mV / °C.
