TC-10 User Manual
________________________________________________________________________________________________________________
___________________________________________________________________________
version 3.9
page 14
Figure 3: Connector pinout of the DIN connector (pins 1 and 3 are connected internally)
5.1. Available sensors
Figure 4: Temperature sensors and cable.
The sensors come with a connection cable (TS-CAB, see Figure 4, left) with a DIN connector
on one end and two 1 mm connectors on the other end. The DIN connector is for connection to
the SENSOR input at the front panel of the temperature controller. The 1 mm connector are for
connection of the sensor, which is available as spare part.
There are two sensors available: the white TS-100S (Figure 4 right, top) and the dark TS-200S
(Figure 4 right, bottom).
Important
: The TS-100S has a special coating that makes it mechanically stable and
waterproof. The TS-200S is optimized for size. Its coating might get leaky after mechanical
stress (e.g. bending of the wires).
Dimensions:
TS-100S:
2.5 mm x 6 mm
TS-200S:
0.8 mm x 6 mm