NVR
-
4532
-
H4/F User
’
s manual (short) ver.1.0
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
7
2. STARTING THE DEVICE
2.1. Electrical connection and other rear panel elements.
1. POWER DC:
Power supply connector for 12V adapter.
2. POWER SW:
Power switch.
3. AUDIO OUT:
Audio output for connecting speakers and amplifier (RCA connector).
4. AUDIO IN:
Audio mono inputs (RCA LINE IN type) for connecting microphone. Allows
intercom connection between the recorder and the client station. The connection is
initiated from the client software or browser. Sound is not recorded.
5. VGA:
VGA main monitor connector, use the D
-
SUB VGA cable to connect monitor.
6. HDMI:
HDMI main monitor connector, use the HDMI cable to connect monitor.
7. USB:
USB port for external Flash memory, mouse connection and other USB
compatible devices.
8. WAN:
RJ
-
45 ethernet port to connect local network and Internet (by router).
9. LAN:
RJ
-
45 ethernet port to connect a switch with IP cameras.
10. ALARM IN:
Alarm input terminal.
11. ALARM OUT:
Alarm output, relay.
12. RS:
RS
-
485 bus connector to connect PTZ cameras.
13. E
-
SATA:
E
-
SATA connector for NV
-
5000EST
-
H4 HDD matrix.
2.2. HDD
’
s mounting
Note:
In order to obtain info on latest compatible HDDs together with their capacities,
please contact
your distributor or visit www.novuscctv.com website. AAT SYSTEMY BEZPIECZEŃSTWA Sp.
z o.o. company does not bear responsibility for any issues arising from usage of unsupported SD
cards/HDDs.
List of compatible HDDs contains all disks supported by a given NVR model, including desktop
HDDs. However due to the fact that image recording prefers reliability usage of 24x7 recording
HDDs is therefore advised.
If a disk was used in another device, formatting becomes necessary. Please take it into
account
due to the irrecoverable data loss resulting from said process.
STARTING THE DEVICE
1
2
5
6
7
4
3
8
9
10
11
12
13