NVR
-
4532
-
H4/F User
’
s manual (short) ver.1.0
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
23
NVR OPERATING
Press the
Apply
button after selecting the resolution. When you change the resolution, you are
prompted to confirm the change. If the change is not confirmed within 20 seconds, the previous
resolution is reverted.
Note! During the first launch the image resolution on the HDMI and VGA outputs is set to
1280x1024. If NVR detects higher resolution monitor connected to the HDMI connector, it will
propose a resolution change.
3.3.6. P2P identifier
NVR allows to connect over the Internet using P2P service. The connection to the recorder is
established by an external server, even if the recorder does not have a public IP address. The recorder
need Internet access only. The connection to the NVR via the
P2P ID
is available from the NHDR
-
5000Viewer software or Rxcamview application.
Caution! P2P service is provided by third party company. AAT SYSTEMY
BEZPIECZEŃSTWA Sp. z o.o. is not responsible for P2P service maintenance.