NVR
-
4532
-
H4/F User
’
s manual (short) ver.1.0
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
9
Unscrew the HDDs mountings as shown on picture below. Each pair allow to screw two HDDs.
Screw the HDDs to mountings. Then screw the mountings to the base. SATA and power cables are
attached to the mainboard. Connect them to HDDs. Repeat the procedure with the second mountings
and HDDs.
When the disks are connected correctly, put on the cover and screw it back.
STARTING THE DEVICE