NVR
-
4532
-
H4/F User
’
s manual (short) ver.1.0
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
14
3.2. First Launch Wizard
To start the unit connect the power cable to DC adapter, turn on the power switch on back panel and
wait for initialization. It lasts for approximately 120 seconds. During this time executing any device
functions and pressing any buttons is prohibited. After first launch NVR displays window as below. It
allows to change the language. Select the desired one from the
Language
list.
Default language is
English
. If you change the language, all the descriptions will be translated
automatically.
Click on the field to expand list or display virtual keyboard.
New Admin Name
-
name of administrator account (default:
admin
).
Password Strenght
-
the scale showing how strong is the written password. It is updated on the fly
while typing the password in the next fiels. Password strenght can be
Low
,
Medium
or
High
and
marked with Red, Yellow or Green color.
New Admin Password
-
it is required to create access password. It must contain 5
-
15 characters.
Confirm password
-
enter the access password again to confirm.
Show Password
-
shows password instead of masking marks.
Unlock Pattern Enable
-
enables an alternative authentication method for the password using the
pattern. It allows to enter administrative settings and make changes. Some settings, such as disk
formatting, import/export settings still require password authentication.
Draw
-
the function shows when Unlock Pattern function is enabled. It allows to create an unlock
pattern. There is 3x3 board to create a pattern by dragging the mouse cursor. The pattern has to be
confirmed by dragging the mouse cursor again.
Apply
-
saves settings.
NVR OPERATING
