NOVOTEST T-UD3 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 53

NOVOTEST T-UD3 Скачать руководство пользователя страница 39

Operation Manual

Hardness Tester NOVOTEST T-UD3

Page. 39

3.

Connect the device to PC using the USB cable supplied. After connection, computer detects a
new connected device, but does not find a driver. It must be installed manually.

4.

For installation enter <START> CONTROL PANEL> DEVICE MANAGER>, in the <COM
and LTP PORTS> section there will be an unidentified device.

5.

Open the device properties by double-clicking the left mouse button on it and select the
<DRIVER> tab.

6.

Click on the button <UPDATE ...>, select <SEARCH DRIVERS ON THIS COMPUTER>.

7.

Click on the <SEARCH> button and select the path to the downloaded (copied) folder with the
driver and press the <NEXT> button, after which the driver installation process will begin.

8.

After successful driver installation. Disconnect the device and restart your PC.

9.

Install the program to work with the device. For this, run the setup.exe file of the program
installation and click the <INSTALL> button (Figure 2.52).

Figure 2.52 – Installing AWP Universal

10.

After the installation is completed, the program shortcut <AWP UNIVERSAL> appears on the
desktop.

2.3.13.2 Using the software

Connect the device to the PC using USB cable and Run the <AWP UNIVERSAL> program, after

selecting the archive location, the program will start.

In the section (Figure 2.53) <WORK WITH ARCHIVE> user can view, print, copy and move data

from the archive.

Each record is saved with full measurement information (a series of measurements). There is brief

information in the record selection window:

−

Name;

−

Date and time;

−

Probe (converter);

−

Probe number (converter);

−

Device number.

To copy data from the device to PC, user needs to put on the measurement time, and then press the

<COPY> button.

Note: By pressing the <MOVE> button, the data is not simply copied to the PC, but also is deleted

from the device memory.

«
...
37
38
39
40
41
...
»

Содержание T-UD3






















































Отзывы:

Нет отзывов