NOVOTEST T-UD3 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 53

NOVOTEST T-UD3 Скачать руководство пользователя страница 34

Operation Manual

Hardness Tester NOVOTEST T-UD3

Page. 34

2.3.8 Settings

When <SETTINGS> menu section is selected, the device enters the setting mode of the following

parameters:

−

<TIME>: setting the time (24h format);

−

<DATE>: setting the date format DAY / MONTH / YEAR;
<LANGUAGE>: selection of the menu language of the device (available in English,
Russian, etc.);

−

<PHOTO>: turn on / off the camera (for versions with the camera);

−

<BRIGHTNESS>: change the brightness of the display;
<PALETTE>: section of menu themes (creation of a color palette of the menu is made
with special software);

−

<SOUND>: there are 4 sound modes (off, keyboard, measurement, keyboard and
measurement);

−

<RESULT>: measurement results can be current (a current measurement value is
displayed) or calculating average value;

−

<VOLUME>: adjust the volume of the device;

−

<AUTO-OFF>: setting the device to automatically turn off when not in use;

−

<RETRO>: allows the user to return to the measurement mode with the last measurements
saved after the device is rebooted;

−

<FLASH>: enable/disable camera flash (for the version with camera);

−

<TOLERANCE>, %: this parameter is used only for intelligent mode. The value in %
controls the range of measurement deviations, which will be included in the calculation of
average for the series when intelligent mode is set;

−

<FILTER>: Kalman or Median, and also turn off the filtering;

To make changes in <SETTINGS> section, all the navigation keys are used: <

>, <

>, <

>, <

>, <

>. Press key <

> to exit.

In Fig. 2.42 <SETTINGS> section is presented.

Figure 2.42 – <SETTINGS> section

2.3.9 Archive

When <Archive> is selected, the device enters the list of saved measurements, that displays the

name, date and time of the measurement, scale, material and average value (Figure 2.43).

«
...
32
33
34
35
36
...
»

Содержание T-UD3






















































Отзывы:

Нет отзывов