NOVOTEST T-UD3, Руководство по эксплуатации, Страница: 23 / 53

Operation Manual
Hardness Tester NOVOTEST T-UD3
Page. 23
9. Set the probe onto the tested material surface (Figure 2.15).
Figure 2.15 – Setting the probe
10. Hold the bottom housing part of the probe with one hand, and with other hand charge the
spring of the probe by mowing the upper housing part down. (Figure 2.16).
Figure 2.16 – Charging the spring of the probe
11. Smoothly push the trigger button on the top of the probe (Figure 2.17). Make sure that the
probe does not move and is securely pressed to the tested surface.
Figure 2.17 – Pushing the trigger button of the probe