Novell PLATESPIN ORCHESTRATE 2.0.2 - ADMINISTRATOR REFERENCE 06-17-2009, Руководство для клиента, Страница: 99 / 164

Managing Virtual Machines 99
no
vd
ocx
(e
n)
13
Ma
y 20
09
7 If you want to cancel the installation before it finished, do one of the following:
Š
Select the VM being installed, then click Edit > Cancel Install .
Š
Right-click the VM being installed, then select Cancel Install .
The VM’s status is returned to being configured but not installed.
5.6 Installing the PlateSpin Orchestrate Agent on
a VM
For instructions on installing the agent on a host server, see “ Installing the Orchestrate Agent Only ”
in the PlateSpin Orchestrate 2.0 Installation and Configuration Guide .
1 In the VM Client , click the Virtual Machines view, right-click the VM where you want to
install the agent, then select Shut Down .
The VM cannot be running during installation of the agent because the VM’s image is
modified.
The agent cannot be installed on a template.
2 After the VM has completed shutting down, select the VM again, then do one of the following:
Š Click Actions > Install Agent .
Š
Right-click the VM, then select Install Agent .
The agent installation begins.
3 You can view the installation progress in any of the following ways:
Š Double-click the VM being installed, click the Event Log tab, then double-click the entry
related to the installation process that has the icon next to it. The Event Log Details
dialog box is displayed and is automatically updated as events occur.
Š Observe messages at the bottom of the VM Client interface.
Š
Click View > Show Progress View to open the Progress window.
Š View the progress in the Jobs tab of the Development Client .
4 To have the VM accepted into the datagrid, follow the instructions in Section 2.6, “Registering
VMs,” on page 22 .
After the Orchestrate Agent has been installed on a VM, the agent begins to communicate with
the Orchestrate Server. However, the VM is not yet available to the datagrid because it must be
accepted.
You can tell which VMs have the Orchestrate Agent installed by whether pie charts are being
displayed in the
CPU and Memory columns in the Virtual Machines view, but only if the VM is
running.