Novell PLATESPIN ORCHESTRATE 2.0.2 - ADMINISTRATOR REFERENCE 06-17-2009, Руководство для клиента

Страница: 81 / 164

Managing Virtual Machines 81
no
vd
ocx
(e
n)
13
Ma
y 20
09
5.3.1 Understanding a VM’s Status
In the Virtual Machines view, the Status column indicates the state of each VM:
Table 5-1
VM Status Icons
VM statuses are updated globally; they show any status change that is made in your local instance of
the VM Client and any change made from other VM Client instances being run by other VM
operators.
You can tell whether a VM or host server has the Orchestrate Agent installed on it by whether there
are pie charts in its
CPU and Memory columns, but only if the VM or host is running at the time.
5.3.2 Canceling a VM’s In-Progress Action
Sometimes the progress hangs for an action taken on a VM, or you might change your mind about
continuing with the action. You can do the following:
Š
To determine whether an action is progressing normally, double-click the icon to open the
Event Log tab for the VM and review the log entries.
For more information, see Section 5.2, “Using Feedback to Manage VMs,” on page 70 .
Š
To cancel an action in the VM Client, right-click the VM in the Virtual Machines view, then
select Cancel Action .
Icon VM’s Status Enabled Actions for the Selected VM
Has been defined or is
being defined. Show Details , Install , Edit , Resync State , Delete , New VM , and
Remove from Group .
The VM is eligible to be installed.
Has an action that is in
progress. Other actions cannot be run against this VM until the current action has
finished.
Is running. Show Details , Restart , Suspend , Pause , Shut Down , Edit , Resync
State , Migrate , New VM , Show Console , and Remove from Group .
Is down. Show Details , Start , Edit , Create Template , Resync State , Move , Delete ,
Install Agent , New VM , and Remove from Group .
Is paused. Show Details , Resume , Edit , Resync State , Delete , New VM , and
Remove from Group .
Is suspended. Show Details , Resume , Edit , Resync State , Move , Delete , New VM , and
Remove from Group .
The state is unknown. Show Details , Edit , Resync State , Delete , New VM , and Remove from
Group .
For information on making an unknown state known, see Section 4.5,
“Resynchronizing a Host Server’s State,” on page 65 and
Section 5.3.10, “Resynchronizing a VM’s State,” on page 86 .