Novell PLATESPIN ORCHESTRATE 2.0.2 - ADMINISTRATOR REFERENCE 06-17-2009, Руководство для клиента, Страница: 137 / 164

Managing Templates 137
no
vd
ocx
(e
n)
13
Ma
y 20
09
8 Click Next to display the following wizard page:
The example shown is for a template.
The network devices are added, deleted, and defined on the Network page, where you add
specific information about your network connections or intended network connections for your
template. You can define more detailed NIC settings in your auto-install files or when
performing a guest installation.
9
To fill in the NIC information, select a task from the following table:
Tasks Steps
Adding a NIC to your
VM 1. Click Add NIC .
2. Fill in the following fields:
Name: Name of the NIC card. This name is used to help you to
recognize each NIC.
Driver Type: Indicates whether the VM has direct access to the NIC. If
the NIC should only interface with the hypervisor, you can select the
specific type of full virtualization. You should have a paravirtualized NIC
with a paravirtualized VM.
MAC Address: Unless you have a specific MAC address you want to
assign to this VM, leave this set to Default , and Xen assigns it a MAC
address when you launch the VM.
3. Click Apply .
Rearranging the
order in which the
NICs are accessed 1. Select the storage device whose order you want to change.
2. Click Move Up or Move Down .
Deleting a NIC from
your VM 1. Select the NIC you want to remove.
2. Click Delete NIC .