Novell GROUPWISE 7 ASYNC GATEWAY - INSTALLATION AND ADMINISTRATION, Руководство по установке и администрированию

Страница: 54 / 140

54
GroupWise 7 Async Gateway Installation and Administration Guide
Novell Confidential Manual (ENU) 21 December 2004
BLOCK
The BLOCK keyword blocks the message when the foreign address matches gwaddresstext . This
keyword differs from NOACCESS because a specific remote or domain profile name can be
specified. If users try to send messages to an address which has been blocked, they receive an
Undeliverable message from the gateway.
Example:
[default:out] remote_profile_name or domain_profile_name
In this example, all users are prevented from sending messages to the remote or domain profile
name.
Example:
[Headquarters:in] primary
In this example, any user in the GroupWise Headquarters domain is prevented from receiving a
message from primary domain.
ALLOW
The ALLOW keyword is the opposite of BLOCK. The gateway delivers the message only if the
message’s recipient matches
gwaddresstext . This keyword is useful if you’ve blocked an entire
domain, but you want to allow specific users in that domain to send or receive messages through
the Async Gateway.
Example:
[Headquarters.in] allow remote_profile_name or
domain_profile_name
In this example, any user in the Headquarters domain is allowed to receive messages sent from the
remote or domain profile name.
Example: [Headquarters.out] allow primary
In this example, the default is set to allow all GroupWise users to send mail to the primary domain.
When you use the ALLOW keyword, it functions as an exclusive ALLOW and restricts the users
to only those that are specifically allowed access, unless a previous setting has provided for more
access.
MAXSIZE
The MAXSIZE keyword determines the maximum size message, including attachments, that the
gateway transfers. MAXSIZE is specified in bytes (1000=1000 bytes), with a range from 0 to
2147483647.
Example:
[default:in] maxsize = 10000
In this example, all GroupWise users can receive messages that are less than 10000 bytes.
ALLOWRULEGENERATED
The ALLOWRULEGENERATED keyword determines whether or not rule-generated messages
are allowed through the gateway. You could use this keyword to control rule-generated message
replies such as “On Vacation” from passing through the Async Gateway. Unlike NOACCESS and
BLOCK, the gateway does not generate an Undeliverable status for rule-generated messages that
are not delivered. Instead, the message remains pending in the sender’s mailbox. This keyword
applies only to outbound messages.
Example:
[default:out] allowrulegenerated = no