Novell GROUPWISE 7 ASYNC GATEWAY - INSTALLATION AND ADMINISTRATION, Руководство по установке и администрированию

Страница: 47 / 140

Configuring the Async Gateway
47
Novell Confidential Manual (ENU) 21 December 2004
4
Fill in the fields:
Send/Receive Cycle: This option does not apply to the Async Gateway.
Minimum Run: This option does not apply to the Async Gateway.
Idle Sleep Duration: Specify the time in seconds that you want the gateway to sleep when it
has no files to send, receive, or convert. When this duration expires, the gateway wakes up
briefly to check for messages. If there are no messages, it sleeps again. The default is 30
seconds.
Snap Shot Interval: Specify the amount of time in seconds after which you want the gateway
to compile its performance statistics. This field is a sliding interval that is used in the gateway
server console. The display changes every 60 seconds to show only the previous
x seconds of
activity. The default is 600 seconds (10 minutes).
5
Click OK to save your changes.
Defining Log Settings
A log file is a processing record for incoming and outgoing messages. Log settings set the
gateway’s log file configuration defaults according to your needs. The Async Gateway creates a
log file as it runs. The gateway log file is stored in the gateway’s 000.prc directory and can be
viewed from the gateway operation screen.
1
In ConsoleOne, select the Domain object where you created the Async Gateway.
2
Right-click the Async Gateway object, then click Properties.
3
Click GroupWise > Log Settings.