Novell Access Manager 3.1 SP 2, Руководство пользователя, Страница: 64 / 126

64 Novell Access Manager 3.1 SP2 J2EE Agent Guide
n
ov
do
cx (e
n)
16
Ap
ril 20
10
3 Specify the following information:
Cluster Name: Specify a name for the cluster configuration.
Type: Specify if the J2EE agent is a WebLogic Agent, JBoss Agent, or WebSphere Agent. A
list of servers is displayed, depending on the selection you make here.
Primary Cluster Server: Select a primary server from the list of servers displayed.
4
Click OK .
The status icons for the configuration and the J2EE Agent should turn green. It might take several
seconds for the J2EE Agent to start and for the system to display a green status.
3.3 Assigning a J2EE Agent to a Cluster
After you create a cluster, you can assign other J2EE Agents to it. A cluster uses any shared settings
you have specified for the primary cluster server.
1 In the Administration Console, click Devices > J2EE Agents .
2
On the Servers page, select the server’s check box, then choose Actions > Assign to Cluster .
To select all the servers in the list, select the top-level Server check box.