Novell Access Manager 3.1 SP 2, Руководство пользователя, Страница: 39 / 126

Installing the J2EE Agents 39
n
ov
do
cx (e
n)
16
Ap
ril 20
10
Server: Specify the name of the WebLogic Administration Console server.
Administration Console Host: Specify the IP address of the Administration Console.
Administration Console Port: Specify a port number for the Administration Console.
Administration Console Username: Specify the username of the admin user of the
Administration Console.
Administration Console Password: Specify the password of the admin user of the
Administration Console.
19 Click Next . The JCC Dependent Packages Installation page is displayed.
20 Click Install to continue with the agent installation.
21 Review the installation summary, then click Install to install the agent.
22 Click Done when the installation is complete.
23 Complete the procedure in Section 1.7.4, “Configuring WebLogic for J2EE Agents,” on
page 40 .
24
Optional) To verify if the installation of the agent is complete, see Section 1.8, “Verifying If a
J2EE Agent Is Installed,” on page 43 .
25 Stop the WebLogic Server if it is running.
26 (Optional) If you want to deploy the sample Payroll application to test the WebLogic Agent,
refer to
“Deploying the Sample Payroll Application” on page 95 .
1.7.3 Installing a J2EE Agent through the Console
1 Download the agent installer.
For software download instructions, see the Novell Access Manager Readme.
2 Enter the following command in the command prompt to run the installer on the console:
<filename> -i console
Replace <filename> with the name of the J2EE agent installer.
3
Review the License Agreement, then press
Y
to accept it.
4 Specify an absolute path to install the Novell J2EE Agent components, or press Enter to
continue with the default installation path.
5 Specify a Java Virtual Machine (JVM) to be used by the installed application.
All the available JVMs are displayed with a number. The default JVM is displayed with an
arrow. Press Enter to select the default JVM, or specify the number of one of the listed JVMs.
6 Specify the information required for communication between the agent and the Administration
Console:
Š
Specify the IP address of your Novell Access Manager Administration Console.
Š
Specify the username and password of the admin user of the Novell Access Manager
Administration Console. Confirm the password by re-entering it.
Š
Review the entered address. If your server is configured for more than one IP address,
make sure you specify the IP address of the machine from which the Novell Access
Manager Administration Console is reachable.