Novell Access Manager 3.1 SP 2, Руководство пользователя, Страница: 42 / 126

42 Novell Access Manager 3.1 SP2 J2EE Agent Guide
n
ov
do
cx (e
n)
16
Ap
ril 20
10
Linux Example:
/opt/bea/weblogic92/common/bin/wlst.sh /opt/novell/
nids_agents/bin/weblogic_config.jy weblogic password base_domain
AdminServer localhost:7001
Windows Example:
C:\bea\weblogic92\common\bin\wlst.cmd
C:\Novell\bin\weblogic_config.jy weblogic password base_domain AdminServer
localhost:7001
3 Restart the WebLogic server.
The agent should import into the Access Manager Administration Console when the WebLogic
server starts.
4 (Optional) Verify and test the installation:
Š To verify that the agent is installed, see Section 1.8, “Verifying If a J2EE Agent Is
Installed,” on page 43 .
Š
To test the agent, see Chapter 7, “Deploying the Sample Payroll Application,” on page 95 .
5 Continue with Chapter 2, “Configuring the Agent for Authentication,” on page 45 to configure
the J2EE Agent.
Using the Administration Console to Configure Login
In the WebLogic Administration Console, you need to configure the JAAS Login Module:
1 Start WebLogic.
2
In a browser, log in to the WebLogic Administration console:
http:// <weblogic ip> : <Weblogic port> /console
Replace <weblogic ip> with the IP address or DNS name of your WebLogic Administration
Console.
Replace
<weblogic port> with the port number of your Web.
3 In the Domain Structure list, click Security Realms .
4
Click the default realm ( myrealm ).
5 Click the Providers tab.
6
In the top right corner, click Lock and Edit .
7 In the Authentication Providers list, click New .
8 Specify a name in the name field, select NovellAccessManagerAuthenticator for the type , then
click OK .
9 In the Authentication Providers list, click DefaultAuthenticator and change the Control Flag
from Required to Sufficient .
10 Return to the Authentication Providers list.
11 Change the NovellAccessManagerAuthenticator Control Flag to Sufficient .
12 Click Activate Changes .
13
Restart the WebLogic server.
Hostname and port localhost:7001 The host and port are separated
with a colon.
Parameter Possible Value Description