Novell Access Manager 3.1 SP 2, Руководство пользователя, Страница: 112 / 126

112 Novell Access Manager 3.1 SP2 J2EE Agent Guide
n
ov
do
cx (e
n)
16
Ap
ril 20
10
5 Click Close .
If the status is not green, you should also check the following:
Š
Section 8.4, “Managing Alerts,” on page 113
Š Section 8.9, “Viewing the Status of Recent Commands,” on page 116
8.3 Managing the Health of a Cluster
1 In the Administration Console, click Devices > J2EE Agents .
2 Click the Agents cluster.
3
Select the Health tab. The Health page displays the current health status of a cluster
configuration.
Server Name: Displays the IP address that identifies the J2EE Agent.
Health: Displays the health status of the server.
Description: Displays the description of the health status of the server.
Status Category If Not Healthy
Services: Lists the Access Manager services
that this agent has been configured to use.
Check the status of the listed services.
Authentication Provider: Indicates whether
the agent has been configured to use an
authentication contract and assigned a base
URL.
See Section 2.3, “Configuring the Agent for Direct
Access,” on page 47 .
Authorization Provider: Indicates whether
the agent has been configured to use
authorization policies before granting access.
To view your configuration, click Devices > J2EE
Agents > Edit > Manage authorization policies .
For configuration information, see Section 6.1,
“Configuring Access Control,” on page 89 .
Enterprise Service Provider
Configuration:
Indicates whether the agent
has a trusted relationship with an Identity
Server. At least one Identity Server must be
configured and set up as a trusted
authentication source for the agent.
See Section 2.3, “Configuring the Agent for Direct
Access,” on page 47 and configure the Trusted
Identity Configuration field.
Configuration Datastore: Indicates whether
the configuration datastore is functioning
correctly.
If it isn’t functioning correctly, you might need to
restore the data from a backup.
Signing and Encryption Keys: Indicates
whether the Signing keystore contains a key.
Click Devices > J2EE Agents > Edit > Service
Provider Certificates > Signing , and replace the
signing key in this keystore.