Novell Access Manager 3.1 SP 2, Руководство пользователя, Страница: 114 / 126

114 Novell Access Manager 3.1 SP2 J2EE Agent Guide
n
ov
do
cx (e
n)
16
Ap
ril 20
10
Alert Message Solution
The Embedded Service Provider base
URL is not set. Configure the
Embedded Service Provider base URL.
Click Devices > J2EE Agents > Edit, and
configure the J2EE Application Server URL field.
For configuration information, see Section 2.3,
“Configuring the Agent for Direct Access,” on
page 47
.
The Embedded Service Provider
returned not OK. Check that the
Embedded Service Provider is running
properly. Restart the agent. Click Devices > J2EE Agents
> [Server Name] > Stop | Start .
The Embedded Service Provider base
URL is invalid. Configure the
Embedded Service Provider base URL. Click J2EE Agents > Edit , and configure the
Devices > J2EE Application Server URL field.
For configuration information, see Section 2.3,
“Configuring the Agent for Direct Access,” on
page 47
.
The Embedded Service Provider could
not be contacted due to an SSL
exception. Check that certificates
are set up properly. Check the SSL certificate trust configuration.
See Section 5.2, “Managing Embedded Service
Provider Certificates,” on page 86 and
Section 5.3, “Configuring SSL Certificate Trust,”
on page 87
.
The Embedded Service Provider could
not be contacted due to a socket
exception. Check that the Embedded
Service Provider is running
properly. Indicates a network problem. Verify that the
J2EE server is running. Restart the J2EE Agent
by clicking
J2EE Agents , select the agent, then
click Stop | Start .
The Embedded Service Provider could
not be contacted due to a general IO
exception. Check that the Embedded
Service Provider is running
properly
.
Restart the agent. Click J2EE Agents , select the
agent, then click Stop | Start.
Not running. Start the J2EE Agent . Click J2EE Agents , select the agent, then click
Stop | Start .
Failed to construct the policy
enforcement points. Check the J2EE
Agent configuration and restart. Click Policies and check your J2EE Agent
policies.
WebSphere global security is not
enabled. Enable WebSphere's global
security
.
This is enabled during installation. See your
WebSphere documentation.
WebSphere server security is not
enabled. Enable WebSphere's server
security. This is enabled during installation. See your
WebSphere documentation.
The JACC PolicyConfigurationFactory
was not initialized. Configure the
J2EE Application Server to use the
proper PolicyConfigurationFactory
.
Contact Novell
®
Support.