Novell Access Manager 3.1 SP 2, Руководство пользователя, Страница: 21 / 126

Installing the J2EE Agents 21
n
ov
do
cx (e
n)
16
Ap
ril 20
10
15 Specify the following information:
Application Server Directory: Specify the directory where you have installed the JBoss
server.
Enter the JBoss server configuration to deploy to: Specify the name of the server
configuration folder.
16 Click Next . The JCC Dependencies page is displayed.
17
Click Install to install the dependent JCC packages.
18 Review the installation summary, then click Install to install the agent.
19 Click Done when the installation is complete.
20 Start JBoss.
The agent is not imported into the Administration Console until the JBoss server is running.
21 To verify the installation of the agent, see Section 1.8, “Verifying If a J2EE Agent Is Installed,”
on page 43 .
1.5.4 Installing the JBoss Agent through the Console
1 Download the agent installer. For software download instructions, see the Novell Access
Manager Readme.
2 Enter the following command in the command prompt to run the installer on the console:
<filename> -i console
Replace <filename> with the name of the J2EE agent installer.
3 Review the License Agreement, then press
Y
to accept it.
4 Specify an absolute path to install the Novell J2EE agent components, or press Enter to
continue with the default installation path.