Novell Access Manager 3.1 SP 2, Руководство пользователя, Страница: 28 / 126

28 Novell Access Manager 3.1 SP2 J2EE Agent Guide
n
ov
do
cx (e
n)
16
Ap
ril 20
10
13 Click Install to continue with the Agent installation.
14 Review the installation summary, then click Install to install the agent.
When installation is complete, the Configure IBM WebSphere Application Server Instance
page is displayed.
15
(Conditional) If you want to complete the configuration now, select the Configure IBM
WebSphere Application Server option to configure application server instances, then click Next
to launch the configuration utilit.
Complete the configuration procedure in
Section 1.6.4, “Configuring WebSphere for J2EE
Agents,” on page 29 .
or
If you want to perform the configuration at a later point of time, click
Next . The successful
installation page is displayed.
16 Click Done to quit the installer.
1.6.3 Installing the WebSphere Agent through the Console
1 Download the file and execute it.
For software download instructions, see the Novell Access Manager Readme.
2
Enter the following command in the command prompt to run the installer on the console:
<filename> -i console
Replace <filename> with the name of the J2EE agent installer.
3 Review the License Agreement, then press
Y
to accept it.
4 Specify an absolute path to install the Novell J2EE agent components, or press Enter to
continue with the default installation path.
5 Specify a Java Virtual Machine (JVM) to be used by the installed application.
All the available JVMs are displayed with a number. The default JVM is displayed with an
arrow. Press Enter to select the default JVM, or specify the number of one of the listed JVMs.
6
Specify the information required for communication between the agent and the Administration
Console:
Š
Specify the IP address of your Novell Access Manager Administration Console.
Š
Specify the username and password of the admin user of the Novell Access Manager
Administration Console. Confirm the password by re-entering it.
Š Review the entered address. If your server is configured for more than one IP address,
make sure you specify the IP address of the machine from which the Novell Access
Manager administration console is reachable.
7
(Conditional) If you do not have the Audit server installed, the J2EE installer installs the Audit
server for you. Specify the IP address of the Novell Access Manager Administration Console as
the
Audit Server IP , then press Enter.
8
(Conditional) If the Audit server is already installed on your machine:
8a To specify if you want to replace the existing Audit server or use the existing server:
Š Press 1 to use the existing Audit server.
Š
Press 2 to replace the existing Audit server, then specify the IP address of the new
server.