Novatel SMART7, Инструкция по установке и эксплуатации

Страница: 5 / 146

SMART7 Installation and Operation User Manual v6 5
4.5.6 Multi-Line Body to Vehicle Frame Rotation Calibration Routine 77
4.6 Azimuth Sources on a SPAN System 79
4.6.1 Course Over Ground 79
4.6.2 Inertial Azimuth 79
4.6.3 ALIGN Azimuth 80
4.7 Data Collection for Post Processing 80
Chapter 5 Wi-Fi Configuration
5.1 Wi-Fi Modes 82
5.1.1 Access Point (AP) 82
5.1.2 Client 82
5.1.3 Concurrent 82
5.2 Wi-Fi Modes 83
5.2.1 Enable the Wi-Fi Access Point 83
5.2.2 Enable the Wi-Fi Client 83
5.2.3 Enable the Wi-Fi Concurrent 85
5.3 Wi-Fi Changes 86
5.3.1 Change the Wi-Fi Passkey 86
5.3.2 Change the SSID 86
5.3.3 Change the Wi-Fi Channel 86
5.3.4 Change the Wi-Fi IP Address 87
5.3.5 Disable Wi-Fi 87
5.4 ALIGN Over Wi-Fi Overview 87
5.4.1 Automatic Wi-Fi ALIGN Corrections 87
5.4.2 Manual Set Up for Wi-Fi Connection between Master and Rover via ICOM1 89
Chapter 6 Ethernet Configuration
6.1 Required Hardware 91
6.2 Static IP Address Configuration 91
6.2.1 Static IP Address Configuration—Receiver 92
6.2.2 Static IP Address Configuration—Windows 7 92
6.2.3 Confirming Ethernet Setup 93
6.3 Dynamic IP Address Configuration 93
6.4 Base/Rover Configuration through Ethernet Connectivity 94
6.5 Large Ethernet Port Data Throughput 96
Chapter 7 NTRIP Configuration
7.1 NTRIP Configuration Over Ethernet 97
7.2 NTRIP Configuration Over Wi-Fi 98
Chapter 8 CAN Bus
8.1 Default Configuration 101
8.2 Configuring the CAN Bus 101
8.2.1 Configuration Notes 101
8.2.2 Example of Enabling the CAN Bus 102
8.2.3 Example of Modifying the CAN Bus Parameters 102