NWDC
IM 26 MAR 2014 © 2014 Novatec, Inc. All Rights Reserved
Page 39
[Type text]
[Type text]
NWDC IM 26 MAR 2014
13 WARRANTY
– NOVATEC, INC. - Effective Date 6-12-2012
NOVATEC, INC. offers COMPREHENSIVE PRODUCT WARRANTIES on all of our plastics auxiliary equipment.
We warrant each NOVATEC manufactured product to be free from defects in materials and workmanship, under
normal use and service for the periods listed under
“Warranty Periods”.
The obligation of NOVATEC, under this
warranty, is limited to repairing or furnishing, without charge, a similar part to replace any part which fails under
normal use due to a material or workmanship defect, within its respective warranty period. It is the
purchaser’s
responsibility to provide NOVATEC with immediate written notice of any such suspected defect. Warranted
replacement parts are billed and shipped freight pre-paid. The purchaser must return the suspect defective part,
freight prepaid and with identifying documentation to receive full credit for the part returned. NOVATEC shall not
be held liable for damages or delay caused by defects. No allowance will be made for repairs or alterations
without the written consent or approval of NOVATEC.
The provisions in equipment specifications are descriptive, unless expressly stated as warranties. The liability of
NOVATEC to the purchaser, except as to title, arising out of the supplying of the said equipment, or its use,
whether based upon warranty, contract or negligence, shall not in any case exceed the cost of correcting defects
in the equipment as herein provided. All such liability shall terminate upon the expiration of said warranty periods.
NOVATEC shall not in any event be held liable for any special, indirect or consequential damages. Commodities
not manufactured by NOVATEC are warranted and guaranteed to NOVATEC by the original manufacturer and
then only to the extent that NOVATEC is able to enforce such warranty or guaranty. NOVATEC, Inc. has not
authorized anyone to make any warranty or representation other than the warranty contained here. Non-payment
of invoice beyond 90 days will invalidate the warranty. A renewed warranty can be purchased directly from
NOVATEC.
Please note that we always strive to satisfy our customers in whatever manner is deemed most expedient to
overcome any issues in connection with our equipment.
Warranty Period:
Note: All warranty periods commence with the shipment of the equipment to the customer.
NWDC Series NovaWheel
™ Dry/Convey = 2 Years
Exclusions:
Routine maintenance/replacement parts are excluded from the warranty. These include, but are not limited to:
hoses, desiccant, filters, filter elements, wiper seals, gaskets, dew point sensors, infrared lamps, motors, internal
solenoids, fuses and motor brushes. Use with abrasive materials will void the warranty of any standard product.
Wear resistant options may be available to extend usable service life with abrasive materials. NOVATEC reserves
the right to limit the warranty if the customer installs replacement parts that do not meet the specifications of the
original parts supplied by NOVATEC.
*Specific Exclusions:
1. NovaDrier warranty is void if coalescing filters are not replaced on a 6-month or yearly basis (per instruction
manual) and/or membrane has been exposed to ozone.
2.Touch screen controls on NovaWheel dryers have a 2-year warranty. All other controls have a 1-year warranty
3. NovaVac Dryer -The ability of the canisters to hold vacuum will be compromised if the vacuum seal edge is
damaged from mishandling. We do not warranty canisters damaged from improper handling. We do, however,
warranty the seals.
4
. LOAD CELLS on our WSB’s are covered by NOVATEC standard warranty as long as they have not been
damaged from improper handling.
5. Velocity Control Valve warranty is voided if unit is placed in direct material flow.
This warranty shall not apply to equipment:
1. Repaired or altered without written approval of NOVATEC unless such repair or alteration was, in our
judgment, not responsible for the failure
2. Which has been subject to misuse, negligence, accident or incorrect wiring by others
3. Warranty is void if processing rates exceed manufacturer-recommended levels or if damage is caused by
ineffective power isolation and/or power spikes/sags or incorrect installation.
NOTE: All conditions and content of this warranty are subject to changes without notice.
