NWDC
IM 26 MAR 2014 © 2014 Novatec, Inc. All Rights Reserved
Page 23
[Type text]
[Type text]
NWDC IM 26 MAR 2014
NOTE: These settings
should be adjusted to
optimal values after starting
to run material.
Press each function button
to enter or change values
for Machine Mount
Receiver.
Machine Mount Receiver
This screen can be accessed by pressing and holding the Machine Mount Receiver icon
on the Quick Op screen on page 21. It can also be accessed by pressing the Convey Menu
button on the Dryer Setup screen (page 26)
Hopper Receiver
If you are using the proportioning
feature, the Hopper Loader screen will
be the same as the non-proportioning
screen except that you will add the %
regrind you want in the mix and you will
enter the number of layers. You may
also adjust the load and dump times
and even the number of blowback
pulses you want depending on the dust
level in the regrind.
40
10
15
3
3
50
2
11
Load Time
Purge Time
Dump Time
Number of
cycles of
failure to load
before an
alarm
Turn
MM Receiver
On/OFF
