NWDC
IM 26 MAR 2014 © 2014 Novatec, Inc. All Rights Reserved
Page 26
[Type text]
[Type text]
NWDC IM 26 MAR 2014
The Dryer Setup screen will direct you to
the sub-menus that are necessary to
control the functional operation of the
dryer.
Whenever you press a button that requires
a numeric or alpha/numeric entry, a
keyboard will appear as described under
7.4 System Conventions on page 16.
The Real Time Clock menu allows the
operator to set the clock in the PLC.
See complete instructions on page 19.
Correct time is important for date/time
stamps on ALARM messages and to allow
Auto Start/Stop of the dryer.
Remember to press:
“Monitor Mode Press to Program” to enable
changes AND press it AGAIN when changes
are completed to start clock.
The AutoStart Menu can be used to start
or stop the dryer while unattended. When
the system is enabled an
icon will be
displayed on the operations screens in the
upper left corner.
Complete instructions are on page 20.
Remember to press “Disabled Press to
Enable” to enable changes AND press it
AGAIN when changes are completed to
enable Auto Start/Stop.
STEP #2:
Depress Dryer Setup
STEP #3:
Depress Real Time Clock Setup
STEP #4
Depress
then AutoStart Menu
Mode
Mode
0
0
0
0
