Nova Voyager, Руководство по эксплуатации

Страница: 20 / 29

123-1016-004
20
The predefined favorite speed values are listed below:
Key Favorite Speed # Speed (rpm)
<F1> #1 250
<F2> #2D (Default) 900
<F3> #3 1600
<F4> #4 3000
To modify the preset values follow the steps below:
1. the user can go to Menu > Edit Fav Speeds
2. Select the favorite speed to modify
3. Modify the speed using the <F1>/<F2> keys or Speed Dial
4. Press <F/R> to save the new speed
5. Press <F/R> again to confirm the value and save to memory
NOTE: When confirming the new Favorite Speed value, the new speed is automatically saved to memory. This value will be stored
permanently in the memory until a factory reset.
NOTE:
When setting a new Favorite Speed #2D, this changes the default speed of the machine until a factory reset.
Direction: FWD/REV
This menu item strictly toggles the drill rotation direction between Forward and Reverse. The drill must be stopped in order to
change directions.
Configuration
Drill Settings

Max Speed – Here the maximum speed of the drill press can be toggled between 3000 and 5500 rpm (Default:
3000rpm)

Units – This toggles the units of measurement between imperial and metric.

Calibrate Depth – This is where the depth sensor can be calibrated or recalibrated.

Braking – This toggles the powered assisted braking on/off. The braking function provides some power to the motor
after the <OFF> button or emergency stop has been pressed. This can be used to help stop the spindle and reduce the
free spinning time. It is important that the user does not press any buttons or try to use the HMI when the motor has
the braking engaged. (Default: OFF)

Load Sensor – This toggles various settings of the load sensor.
o
Jam Detect – This setting detects if the drill bit gets jammed and shuts off the motor. (Default: ON)
o
Spike Detect – This detects if the load on the motor spikes abnormally and shuts off the motor. (Default: ON)
o
Spike Threshold – This is the load threshold which constitutes a load spike.

Vibration Sensor – This changes the vibration sensor sensitivity. The vibration sensor will automatically detect
vibrations in the drill press and shut off if the safety threshold has been reached (e.g. if a workpiece has been caught
and is spinning around). There are 4 sensitivity settings: DISABLED / LOW / MEDIUM / HIGH. (Default: Disabled)

Sounds/Warnings – This toggles various sound settings.

Set Depth Reached – List of actions for the user to select from on what to do once the set depth has been reached.