123-1016-004
11
Connecting to Power
1.
The supplied power cord will have a three-prong plug with a grounding prong.
The plug must be plugged into a matching outlet that is properly installed and
grounded in accordance with local electrical codes.
FOR 115V ONLY: A temporary adapter can be used to plug into a two-
pole outlet if a three-prong outlet is unavailable. The ground tab on the
adapter must be connected to the screw on the outlet for proper
grounding. This adaptor should only be used until a qualified electrician
can install a properly grounded outlet.
If it is necessary to use an extension cord, the cord should be grounded and in good
condition. Use an extension cord with a heavy enough gage and to avoid power loss and over-heating, and it is not recommended to
use a long extension cord.
NOTE: Ground Fault Interrupters (GFI's) are generally not compatible with Variable speed motors. If you wish to use a GFI or RCD,
select a unit that is confirmed for use with a Variable speed motor using capacitor charge.
USING THE NOVA VOYAGER DVR DRILL PRESS
Figure 7 - Front view of headstock
WARNING!
Improper connection of the motor can result in a risk of electrical shock.
IMPORTANT: A Surge Protection Device must be used, rated to at least 15 amps (for 115V countries, USA and Canada)
or 10 or 15 amps (230V countries). This is to
protect the DVR motors electronics from electrical spikes or surges.
Ground tab
connected to
outlet screw.
Содержание Voyager
Страница 1: ...123 1016 004 1 NOVA Voyager DVR Drill Press OPERATION MANUAL ...
Страница 25: ...123 1016 004 25 833 Voyager Drill Press Headstock Breakdown ...
Страница 26: ...123 1016 004 26 833 Voyager Drill Press Stand Table Breakdown ...
Страница 28: ...123 1016 004 28 833 Voyager Drill Press Wiring Diagram ...
