123-1016-004
18
Menu List
Speed Chart
User Set Depth
Self-Start
Advanced Modes
Edit F Shortcuts
Edit Favorite Speeds
FWD/REV
Configuration
Speed Chart
The NOVA Voyager DVR Drill Press includes a built-in speed guide for drilling. The main benefit of the speed chart is the ability to
input the type of drill bit, the drill bit size, and the work piece material, and the drill press will then set the speed to the
recommended value.
NOTE: The speed chart is available in both metric and imperial units. This option can be changed in Configuration>Drill Settings.
To use the speed chart:
1.
Go to the Menu > Speed Chart.
2.
Select the type of drill bit.
3.
Select the drill bit size.
4.
Select the work piece material.
5.
Confirm the new set speed.
6.
The display will return to the default screen with the new speed selected.
NOTE: The speed chart is only used to give an approximate of the speed that should be used. The actual drilling speed should be
selected based on the experience of the operator.
User Set Depth
The “User Set Depth” feature allows the user to quickly set the drilling depth. This is essentially an electronic depth stop that will
give warning beeps when approaching the set depth and stop the motor when the depth has been reached.
To activate the User Set Depth feature, simply select the feature in the menu and set a depth to drill. The drilling depth can be set
using the <F1>/<F2> keys or Speed Dial. Pressing <ON> will reset the value to OFF. Press the <Zero/Confirm> button to save the
depth selection and return to the main screen, or press <Menu> to cancel any changes. For blind holes of a certain depth, it is
recommended that the drill bit “Depth” is set to Zero on the surface of the workpiece.
When the “User Set Depth” is activated, the current set depth will show on the main screen. When the feature is disabled, the value
will be blank. When drilling to the set depth, the machine will start beeping at 0.5” (or 10mm in Metric mode), and the beeping will
become more rapid as the drill gets closer to the set depth. The motor will finally turn off once the set depth has been reached and
the machine will revert to idle.
To turn off the “User Set Depth”, press the <ON> button followed by the <Zero/Confirm> button.
Содержание Voyager
Страница 1: ...123 1016 004 1 NOVA Voyager DVR Drill Press OPERATION MANUAL ...
Страница 25: ...123 1016 004 25 833 Voyager Drill Press Headstock Breakdown ...
Страница 26: ...123 1016 004 26 833 Voyager Drill Press Stand Table Breakdown ...
Страница 28: ...123 1016 004 28 833 Voyager Drill Press Wiring Diagram ...
