_
63
_
EN
_
62
3
Fit the parachute container
Now place the parachute container horizontally (with the opening and the folded
suspension lines pointing downwards) into the parachute container. The handle
must point outwards. If the connection strap is not already correctly fitted into the
red channel, this should be done now.
4
Close the parachute container
Once the parachute has been positioned correctly, thread pieces of paraglider line
through both loops of the leaves. The correct sequence is to thread the outermost
leaves first, followed by the grey loops.
7
Compatibility and deployment test
A
C
E
B
D
5
Fit the closing pins
Please note:
the next step is critical if the parachute is to work correctly!
Push the shorter rod through the loop that is nearer the deployment handle and the
longer rod through the loop further to the left (pilot‘s perspective).
Never push the longer rod through both loops! This would stop the parachute
from deploying!
6
Fit the deployment handle
Fit the deployment handle to its Velcro base on the right hand side. First put the
lower plastic part into the cloth pocket and then fit the upper one into the flexible
neoprene pocket. Velcro also secures the position of the handle. Then the lid is
used to close the container.
