Document 15094 Rev C 11/20/95 15094:C
Page 13
Printer Configuration
Refer to the documentation supplied with the
PRN-4 for instructions on the printer's menu con-
trols. Set the printer's options as follows:
L/R ADJUST:
0
FONT:
HS DRAFT
LPI:
6CPI
ESC CHARACTER:
ESC
BIDIRECTIONAL COPY:
ON
CG-TAB:
GRAPHIC
COUNTRY:
E-USA ASCII
AUTO CR:
OFF
LANGUAGE:
ENGLISH
AUTO TEAR:
1S
COLOR OPTION:
NOT INSTALLED
FORMLEN:
LINES:
6 LPI=60
STANDARD:
EXECUTIVE 10.5"
CPI:
10 CPI
SKIP:
0.5"
EMULATE:
EPSON
I/O:
BUFFER:
36K
SERIAL:
BAUD;
2400
FORMAT:
7 BIT, EVEN, 1 STOP
PROTOCOL:
XON/XOFF
CHARACTER SET:
STANDARD
S1.ZERO:
ON
AUTO LF:
OFF
MENLOCK:
ALL
PAPER:
BIN 1:
12/72''
BIN 2:
12/72''
SINGLE:
12/72''
PUSH TRA:
12/72''
PULL TRA:
12/72''
PAP ROLL:
12/72''
PAPOPT:
NO
Section 1.5: Remote Printers
The AM2020/AFP1010 can employ PRN-4 remote
printers. PRN-4 remote printers provide hard-copy
printout of all status changes within the system, and
time-stamps the printout with the current time-of-day
and date. The PRN-4 provides 80 columns of data on
standard 9" by 11" tractor-feed paper.
Installation
Remote printers require 120 VAC, 50/60Hz primary
power. A secondary power source (battery backup) is
not provided. Recommendation: Use a separate Un-
interruptable Power Supply (UPS) 50 W minimum, UL
listed for Fire Protective Signaling.
An EIA-232 interface on the SIB provides connection
between the FACP and the PRN-4. An installer pro-
vided cable must be assembled for connection to the
printer's EIA-232 port. See Figure 2-4 for wiring in-
structions.
A special print feature allows the PRN-4 to print all
information programmed into the FACP (including sys-
tem configuration and addressable device parameters).
Twisted-pair
nc
Twisted-pair
SIB-NET
1
EIA-232 Reference
2
Transmit to Printer
3
EIA-232 Reference
4
Receive From Printer
SIB-NET (Connector P3)
NOTES:
1)
Outputs are power limited and are not supervised.
2)
Make connections with overall foil/braided-shield twisted-pair cable.
3)
This printer does not support Near Letter Quality (NLQ) mode.
PRN-4
R e m o t e
Printer
3
Plug this DB25 connector
into the EIA-232 port of
the printer.
50 feet
(typical)
Wiring distance is limited
by cable capacitance.
Refer to the EIA-232E
standard.
Figure 1-6: Remote Printer to SIB Connections
www.PDF-Zoo.com
