Northern Tool and Equipment Powerhorse 63388, Руководство пользователя

Страница: 14 / 31

Page 14 of 31
Site Considerations
Location
The wood chipper must be placed on a firm, flat, grass or dirt surface to prevent the machine from
tipping. DO NOT place the machine on concrete, asphalt, or other hard surfaces. The chips could
bounce up from the hard surface and cause injury.
Working Clearances
Consider the length of the material to be processed through the machine and make sure that there is
enough height above the wood chipper to accommodate the material.
Make sure the unit is located close to the area where the chips are going to be used to reduce
carrying.
Stay clear of the discharge area. Make sure all bystanders, children, pets, or objects that you do not
want damaged or covered in chips, are clear of the discharge area.
Assembly Instructions
⚠
WARNING
This machine presents serious injury hazards to untrained users. Read through this entire manual to
become familiar with the controls and operations before starting the machine!
The major components of the wood chipper have been assembled at the factory. Some minor
assembly is required. The assembly process will use all the parts and hardware listed in the inventory.