Northern Tool and Equipment Powerhorse 63388, Руководство пользователя

Страница: 7 / 31

Page 7 of 31

Make sure the machine has come to a complete stop and disconnect the spark plug wire before
freeing a jam or clog, emptying the bag, filling the gas tank, or performing any maintenance or
repairs.

Never leave the machine running unattended. Always turn off the engine, wait for the impeller to
come to a complete stop, and disconnect the spark plug before leaving the area. Always move the
unit to a safe storage area when not in use.

Never attempt to reposition or move the debris loader unit while it is running. Doing so could
cause the machine to tip over and cause unexpected injury.
⚠
CAUTION
WOOD CHIPPER USE AND CARE

Do not force the wood chipper. Products do a better and safer job when used in the manner for
which they are designed. Plan your work, and use the correct product for the job.

Check for damaged parts before each use. Carefully check that the wood chipper will operate
properly and perform its intended function. Replace damaged or worn parts immediately. Never
operate the wood chipper with a damaged part.

Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with
the power switch is dangerous and must be repaired by an authorized service representative
before using.

Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.

Store the wood chipper when it is not in use. Store it in a dry, secure place out of the reach of
children. Inspect the tool for good working condition prior to storage and before re-use.

Use only accessories that are recommended by the manufacturer for use with your wood chipper.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.

Keep guards in place and in working order. Never operate the product without the guards in place.

Do not leave the wood chipper running unattended.
Specific Operation Warnings
⚠
WARNING

READ THIS ENTIRE MANUAL AND MOTOR MANUAL: These manuals contain proper operating
and safety instructions for this chipper/ shredder.

SAFETY EQUIPMENT: Wear safety glasses, hearing protection, and gloves when operating a
wood chipper. Make sure any bystanders are also wearing safety equipment.

ENGINE OPERATION: Refer to the engine manual for operating instructions and gasoline engine