Northern Telecom Meridian 1 PC Console Interface Unit, Руководство по установке и обслуживанию

Страница: 149 / 232

Maintenance Page 139 of 220
Meridian Companion Installation and Maintenance Guide
Administration log
The Administration log lists event messages for administrative events such as
system initialization, Configuration sessions in which a change was made,
invalid password attempts, and password changes. By using this feature you
can
• check what events occurred
• check when the events occurred
• check the number of consecutive occurrences of an event
• erase the log
Each event is assigned a severity number. An
S
preceding this number (for
example,
S4
) may appear in the event message.
S1
has the lowest priority. If
the log is full, new event messages with a higher severity number replace
existing event messages of a lower severity. For this reason, check event
messages at regular intervals and deal with all messages.
Entering the Administration log
1. Press
ƒ••‚
and enter the Installer password.
2. From
A. Configuration
, press
*
until the display shows
C. Maintenance
.
3. Press
^
, then press
*
until the display shows
6. Admin Log
.
4. Press
^
. The display shows
Start of new log
or
Start of log
.
ATTENTION!
Because the Administration log holds a maximum of 10
events, you should verify and record these events
periodically. Erase the log after dealing with the events. If your
system is also equipped with Companion Manager, these
logs can be printed as a report.