M5212 ACD Set
General Description, Installation, and Maintenance BCS33 and up
4-1
Installation procedures
Installation procedures consist of unpacking the M5212 ACD set and
connecting it to the ac wall outlet and telephone line jack.
Note: No headset is shipped with the M5212.
Unpacking
Use proper care while unpacking any M5212 ACD set. Check for damaged
containers so that appropriate claims can be made to the transport company
for any items that may have been damaged in transit.
If for any reason the phone set must be returned to Northern Telecom, be
sure that it is packed in the original container as shown in Figure 4-1 on
page 4-4 in order to avoid damage during shipment. Remember to include
all loose parts in the shipment, for example, cords, AC transformer, and the
handset.
Installation
Installation requires plugging the cords into the Teladapt
jacks that are
accessible at the base of the set as illustrated in Figure 4-2 on page in 4-5.
Cord restraining tabs are provided for security. Make the necessary
connections to the Teladapt connecting block (Tip [ + ] green lead and Ring
[ - ] red lead), and plug the line cord into the Teladapt jack (Figure 4-3 on
page 4-6). Proceed with the steps as detailed in Procedure 4-1.
Procedure 4-1xxx
M5212 ACD Set Installation
Step
Action
1
Place the telephone in the work area (close to the line cord connecting
block). Turn the phone upside down on several sheets of soft, clean
paper on a solid, level work surface in order to prevent damage to
movable keys, the telephone face, and the display.
- continued -
