background image

Limited Warranty 

 

31 

Dear Valued Customer: 
 

 

The NorthStar Product you just purchased is built with the finest material and craftsmanship.  Use this 
product  properly  and  enjoy  the  benefits  from  its  high  performance.    By  purchasing  a  NorthStar 
product,  you  show  a  desire  for  quality  and  durability.    Like  all  mechanical  equipment  this  unit 
requires a due amount of care.  Treat this unit like the high quality piece of machinery it is.  Neglect 
and  improper  handling  may  impair  its  performance.    Please  thoroughly  read  the  instructions  and 
understand the operation before using your product. 

 

Limited Warranty 

 

NorthStar shall warranty any

 

piece of equipment manufactured, or parts of equipment manufactured, 

to  be  free  from  defects  in  material  or  workmanship  for  a  period  of  2  years  for 
noncommercial/nonrental  use  and  a  period  of  90  days  for  commercial/rental  use  from  the  date  of 
purchase by user. 

 

NorthStar shall warranty any wear item, including, but not limited to, valves, seals, pump diaphragms, 
hoses, and filter elements to be free from defects in material or workmanship for a period of 90 days 
from the date of purchase by user.  This warranty applies to the original purchaser of the equipment 
and  is  non-transferable.  Verification  of  purchase  is  the  responsibility  of  the  buyer.  Parts  will  be 
replaced  or  repaired  at  no  charge,  except  when  the  equipment  has  failed  due  to  lack  of  proper 
maintenance. Any misuse, abuse, alteration or improper installation or operations will void warranty. 
Determining whether a part is to be replaced or repaired is the sole decision of NorthStar. 

 

NOTE: 

Some services performed by parties other than NorthStar may void warranty. 

 

This warranty covers parts only. It will not provide for replacement of complete products due to 

defective parts.  

Components not manufactured by NorthStar are guaranteed by their manufacturer and can be 

serviced at factory-authorized locations near you. Any costs incurred due to replacement or 

repair of items outside of a NorthStar approved facility is the responsibility of the buyer and not 

covered under warranty. NorthStar can supply you with the service center location in your 

area. 

 

This warranty specifically excludes the following; failure of parts due to damage caused by accident, 
fire,  flood,  windstorm,  acts  of  God,  applications  not  approved  by  NorthStar  in  writing,  corrosion 
caused by chemicals, use of replacement parts which do not conform to manufacturer’s specifications, 
and damage caused by vandalism. Additional exclusions: loss of running time, inconvenience, loss of 
income, or loss of use, including any implied warranty of merchantability of fitness for a specific use. 
 
Warranty does not cover items subject to normal wear such as tires, receptacles or any part subject to 
direct physical contact by the public. This warranty does not cover any personal injury or damage to 
surrounding property caused by failure of any part.  
 
This warranty is in lieu of any other warranty  expressed or implied and NorthStar assumes no other 
responsibility or liability outside that expressed within this warranty. 
 
Please fill in the following information and have it on hand when you call in on a warranty claim. 
 
Customer Number: ______________________________________________________________ 
 
Date of Purchase: _______________________________________________________________ 
 
NorthStar Serial Number: ________________________________________________________ 
 
Item 

Number: 

__________________________________________________________________

Содержание 2287181

































Отзывы: