Operation – Using the Regulator
26
4. Turn pump
on
The pump will build pressure until the shut off pressure is reached. Once the
shut off pressure is reached, the pump motor will turn off.
5. Begin
spraying
Actuate the spray gun trigger or open the valve(s) to the boom nozzles.
Adjust spray gun nozzle to desired spray pattern and/or
make sure the boom nozzles are free of debris.
6. Adjust
pressure
Turn regulator knob counter-clockwise to reduce and set the desired
spraying pressure.
Note: When setting the pressure, always reduce the
pressure until the desired setting is reached.
Note: If the pressure is still too low when the regulator
knob is completely tightened, smaller or fewer nozzles
need to be used.
7. Discontinue
use if
clogged or
inoperative
If the regulator becomes clogged or inoperative during use,
discontinue
use immediately
.
- DO NOT attempt to service while chemicals are in the system and power is
connected.
Note:
A reserve, clean container capable of holding at least the volume of the entire pump system
should be kept for use when the system needs to be emptied temporarily for repairs. It is
advisable to purchase a reserve tank suitable for pesticide storage from Northern Tool and
Equipment for use in these circumstances. The container should be properly labeled as to its
contents if it is used.
