Installation—2681022
11
Step Seven: Install rubber grommet (784519) into hole in
tank
Apply soap to rubber grommet.
Press grommet into the 9/16" hole in the sprayer
tank. Ensure the bottom lip of the grommet is fully
through the hole, and the top lip is flush with the top
of the tank.
Step Eight: Reinstall pump onto sprayer
Apply soap to bypass fitting on
regulator.
Press bypass fitting into the
grommet.
Reinstall four screws through
pump feet and into threaded holes
in the tank.
Step Nine: Reinstall hoses
Install fitting on inlet hose into
inlet port of the pump. To insert
quick connect fittings, lubricate
O-ring with water and twist
fitting while inserting into pump
port. Secure with steel clip.
Install fitting on outlet hose into
outlet port of the regulator. To
insert quick connect fittings,
lubricate O-ring with water and
twist fitting while inserting into
pump port. Secure with steel clip.
Continue to page 22.
