Installation—26810011, 2681201, 99916, and 99917
13
Step Seven: Install rubber grommet (784519) into hole in
tank
Apply soap to rubber grommet.
Press grommet into the 9/16" hole in the sprayer
tank. Ensure the bottom lip of the grommet is fully
through the hole, and the top lip is flush with the top
of the tank.
Step Eight: Reinstall pump onto sprayer
Apply soap to bypass fitting on
regulator.
Press bypass fitting into the grommet.
Reinstall four screws through pump
feet and into threaded holes in the
tank.
Step Nine: Reinstall hoses
Install fitting on inlet hose into inlet
port of the pump. To insert quick
connect fittings, lubricate O-ring with
water and twist fitting while inserting
into pump port. Slide red QC clip
closed.
Install gun hose onto 3/8" HB elbow
fitting in the outlet port of the
regulator. Secure with hose clamp.
Continue to page 22.
